Klassik The quality safety gate for a quality fence!

Our LEGI swinging gates were developed in line with the enormous security demands in the public sector, in the business sector, in the industry and in special security areas.
The design of the re-adjustable gate mountings incorporated into the frame profile, of the bottom catch and that of the lock case shows no protruding parts and therefore guarantees the maximum protection against accidents.

Furthermore, it meets the highest security demands against burglary as the lock area is secured from the outside by means of a welded stop bar and the bolts of the re-adjustable gate mountings cannot be reached for the unauthorised gate opening from the outside.

The high standard of workmanship combined with an extreme corrosion protection make our gates distinctive and constantly functioning driveway or entrance safeguards. The 1, 2 or 3-section gates are built up to 4,000 mm in height, with the single-section gate being up to 6,000 mm in width.

Gate posts / gate mounting

Gate posts made from square steel tubes adjusted to the size of the gate with welded, smooth flush cover plates. Fence connection options can be provided.
The gate mounting is safely incorporated into the frame profile and only re-adjustable from the inside.

Swinging section

Swinging section from the square steel tubes adjusted to the size of the gate with beam infill from 30/20 pipes spaced at 120 mm or with welded lattice fence infill. Upper trim with serrated border is possible.

Opening angle of the gate up to 135 degrees (standard) or 180 degrees.

Double swing gates

LEGI double swing gates, which we have developed for special situations, primarily children's playgrounds; double swinging without a spring. The special gate mounting in an oil bath allows an opening of the double swinging section of approximately 90 degrees as well as an automatic return of the section to the neutral position. In the process, the oil bath has a dampening effect on all movements.

The bottom catch is safely incorporated into the frame and can only be actuated in the open state. If desired, they can be locked with profile cylinders. Insertion cylinder lock, galvanised, without profile cylinder, with VA lock plate and anodised latches and collars.

Download section
Corrosion protection (LKS / KS)
hot-dip galvanised DIN EN ISO 1461
hot-dip galvanised DIN EN ISO 1461 and additional powder coating
Standard colours (SF)
SF I
RAL
6005
Moos green
RAL
6009
Fir green
RAL
7016
Anthracite
SF II
RAL
9010
Pure white
RAL
7023
Concrete grey
RAL
9005
Black
RAL
7030
Stone grey
SF III
RAL
5010
Gentian Blue
RAL
8014
Sepia brown
RAL
3000
Fire red
We provide additional RAL colours upon request.
DEKRA certified quality
The production is certified according to DIN ISO 9001:2008