LEGI inclined grilles Seamlessly overcome height indifferences.

In contrast to the standard fence mesh we produced 40 years ago, which is welded at right angles and therefore cannot be twisted, our developed LEGI inclined grilles R-S.S can ideally follow the ground movements at an interval of 4%. We achieve this by keeping the upright wires of the mesh vertically arranged, but all horizontal wires of the mesh receive a corresponding incline.

An expensive planning and measuring of the land contour and the rectification of possible sources of error are spared. Due to the parallel implementation with the ground, the fence system also receives a smooth, steady gradient and therefore a better look.

Stability and security are thus supported in such a way that the grilles-post connection remains at the specified post locations.

 

Innovation medal award

GaLaBau 2002, Booth: 1-184
Awarded product:
LEGI inclined grilles R-S.S
Rationale for the GaLaBau Evaluation Committee's award for innovations in gardening, landscaping and sports field construction:

"If a technical safeguard is necessary in an uneven landscape, the system offers an innovative and easy-to-use solution that can be used for different post forms already included in the manufacturer's
range. The reduction in work required is demonstrated, inter alia, by the fact that the gap-masking between the lower edge of the fence and the terrain,
which is necessary for conventional fences in such situations, is avoided here."

Possible grille heights

Inclinations of x times 100 mm height difference measured at the post up to a height of 600 mm are provided (maximum grille height 1,830 mm). That means inclinations up to 24%. In the process, grilles can be installed ascending or dipping both on the LEGI system R uno, LEGI system R pure as well as on the LEGI system R fit. Thus, the often very expensive steep cutting of the lower or upper edges of the grilles with the welding on of a sloping end wire is spared. With our LEGI inclined grilles R-S.S, the inclined grilles can be defined already during planning or later when concreting the posts. The inclined grilles can be stocked as a standard.

For installation, the posts are to be concreted in the same horizontal distance as on level ground. For a level change, only the next post is set in concrete by a factor of 100 mm higher or lower. In this way, the appropriate LEGI inclined grilles R-S.S can normally be put up and secured in a short period of time.

Corrosion protection (LKS / KS)
hot-dip galvanised DIN EN ISO 1461
electro-galvanised DIN 50961 and additional powder coating
hot-dip galvanised DIN EN ISO 1461 and additional powder coating
Standard colours (SF)
SF I
RAL
6005
Moos green
RAL
6009
Fir green
RAL
7016
Anthracite
SF II
RAL
9010
Pure white
RAL
7023
Concrete grey
RAL
9005
Black
RAL
7030
Stone grey
SF III
RAL
5010
Gentian Blue
RAL
8014
Sepia brown
RAL
3000
Fire red
We provide additional RAL colours upon request.
DEKRA certified quality
The production is certified according to DIN ISO 9001:2008
LEGI-grilles R
Wire gauge